Create a free Industrial Equipment News account to continue

Thermoelectric Cooler Assembly Series with Advanced Semiconductor Materials

It's designed for sample storage compartments commonly found in analytical instrumentation.

Unnamed
Laird

Laird Thermal Systems, a manufacturer of thermal management solutions, has launched a new thermoelectric cooler assembly series that uses next-generation thermoelectric coolers with advanced semiconductor materials. The enhancement boosts cooling performance by up to 10% over previous models. In combination with a high-performance heat sink and fan shroud assembly, the SuperCool X Series can transfer heat to ambient environments more rapidly than legacy systems. The SuperCool X Series is designed for sample storage compartments commonly found in analytical instrumentation or medical diagnostic chambers with tight geometric space constraints.

At the center of every SuperCool X cooler assembly is an array of high-performance thermoelectric coolers. The coolers are made with advanced thermoelectric materials that provide increased cooling capacity for the assembly. The coolers maintain a high coefficient of performance (COP) to minimize the amount of input power required for operation and reduce the heat rejection requirement on the hot side.

The SuperCool X Series contains three model types that provide design engineers with several heat transfer mechanisms on the control side. Heat can be absorbed via convection (air-to-air), conduction (direct-to-air), or liquid (liquid-to-air). The Liquid-to-Air Models SLAX have a cooling capacity of up to 400 Watts, while the Direct-to-Air Models SDAX have up to 220 Watts and the Air-to-Air Model SAAX have up to 175 Watts of heat pumping capacity. All cooling capacities were measured at ΔT=0°C and Tamb = 35ºC with a nominal operating voltage of 24 VDC. These compact, refrigerant-free thermoelectric cooler assemblies provide an environmentally friendly alternative to compressor-based systems for precise temperature control.

Depending on the application, SuperCool X thermoelectric assemblies can be used for heating or cooling. Custom configurations are available upon request.

For more information, access SuperCool X Series datasheets and application notes.

More in New Products