Chemical Resistant, Two Part Epoxy

This two component product features unique handling properties, as Part A is a moderate viscosity liquid and Part B is a powder.

Master Bond 58a74bd0d691e
Mb Logo

Widely used in the electronics, aerospace, optical and specialty OEM industries, the Master Bond (Hackensack, NJ) EP126 excels in high temperature applications up to +600°F. This two component product features unique handling properties, as Part A is a moderate viscosity liquid and Part B is a powder. It can be easily mixed using a forgiving 100 to 50 ratio by weight. The mixed system is a malleable paste, with an exceedingly long open time of more than 5 days for a 100 gram batch. The curing is straightforward: 3-4 hours at 300°F or 2-3 hours at 350°F. Features include:

  • The ability to adhere well to many substrates including metals, composites, glass, ceramics, rubbers and many plastics.
  • A high tensile lap shear strength, tensile modulus and compressive strength of over 2,800 psi, 425,000-475,000 psi and 32,000-34,000 psi, respectively.
  • The ability to resist a variety of chemicals such as water, oils, acids, bases and many solvents. Additionally, it is formulated as a toughened system allowing it to withstand rigorous thermal cycling.
  • A dimensionally stable formula, with low shrinkage upon curing and is machineable. It also is a very good electrical insulator, especially as it retains high dielectric strength at elevated temperatures.

When used as an adhesive and sealant, EP126 can be conveniently applied with a spatula or knife. This product has a service temperature range of -80°F to +600°F. EP126 features a shelf life of 6 months in its original, unopened containers and is available in kits ranging from ½ pints to 5 gallons.

www.masterbond.com; 201-343-8983

More in New Products