Create a free Industrial Equipment News account to continue

AMH Calls for Improved Safety in Non-Standard Lifts

The company notes misuse of hoist rings and eyebolts in non-traditional lifts.

Cartec 807 X From Amh
AMH

‘Below the hook’ equipment supplier All Material Handling (AMH) announced that it believes too many non-traditional lifts are still taking place using the wrong hoist rings and eyebolts, creating unnecessary safety risks.

“Whether on a construction site, in a machine shop, or at a manufacturing facility, there are two primary goals: move the load without damaging it; and make it home safely at the end of your shift," All Material Handling CEO Peter Brettner said. “We’re still seeing a lot of incorrect use of eye bolts in particular. Traditional eyebolts are best used for straight in-line lifts only, or they incur a significant reduction in the working load limit. The old school alternative was often to wrap a round sling around the load and see how it went, but frankly, both can be an accident waiting to happen.”

AMH added that while a sling and some hooks are usually suitable for a standard lift with easy connections, such as a shackle and welded eye or plate, a non-traditional lift, like a large motor or a flat gear, can be much more challenging. In these cases, AMH recommends rotating hoist rings, as they are specifically designed to lift from the focal point and keep the load centered. Traditional eyebolts can tend to sideload. 

Amh Recommends The Cartec 807 XhtAMH

AMH is adding the Cartec series of lifting points and rotating hoist rings to its product portfolio, ensuring that riggers have easy access to the right tools for the job when it’s a non-standard load. The Cartec 807 series of rotating eyebolts provide a 100% working load limit at any angle allowed by the corresponding user’s manual, and the load limit is clearly visible on the bolt itself, eliminating guesswork.

“Using the right swivel hoist ring and rotating eyebolt means there is no more second-guessing the reduced working load limit of a standard eyebolt because it is not an inline pull. The load limit is easily checked as it’s forged into the product and doesn’t change,” Brettner said.

“There is also no more shimming the shoulder to get a proper lift angle, which can happen with traditional eyebolts, or worse, risk having lousy positioning and causing a failure. Contractors are increasingly focused on enhancing safety. While a swivel eyebolt has a slightly higher price than a standard eyebolt, this is nothing compared to the human and financial cost of an incident that causes injury or even death.”

More in Safety